\r\n
\r\n \r\n Each color shows the largest group based on
2020 Voting Age Population\r\n (VAP).
Color intensity shows each group's share\r\n
\r\n Each color shows the largest group based on
2015-19 Citizen\r\n Voting Age Pop. (CVAP).
Color intensity shows each group's share\r\n
\r\n A fundamental goal of redistricting is to create equal population\r\n districts. This helps ensure that each person has equal representation\r\n in Congress (1 person, 1 vote).\r\n
\r\n \r\n{{postgres.statename}} currently has one at-large district. Due to reapportionment it will increase to 2 districts.
\r\n \r\n{{ postgres.statename }} currently has two districts. Due to reapportionment it will decrease to one at-large district.
\r\n \r\n\r\n The table above shows how close or not {{ postgres.districtname }} compares to the average 2020 district population in {{ postgres.statename }} of {{ Math.round(postgres.statepop2020 / postgres.seats2020).toLocaleString() }} people, based on the \r\n loss of 1 seat (from {{ postgres.currentseats }} to {{ postgres.seats2020 }})\r\n loss of {{ Math.abs(postgres.seats2020 - postgres.currentseats) }} seats (from {{ postgres.currentseats }} to {{ postgres.seats2020 }})\r\n gain of 1 seat (from {{ postgres.currentseats }} to {{ postgres.seats2020 }})\r\n 1\">gain of {{ postgres.seats2020 - postgres.currentseats }} seats (from {{ postgres.currentseats }} to {{ postgres.seats2020 }}).\r\n
\r\n\r\n {{ postgres.statename }} has a single at-large district. The state will not gain new seats based on reapportionment.\r\n
\r\n \r\n\r\n \r\n \r\n{{ postgres.statename }} will have the same # of congressional districts ({{ postgres.seats2020 }}) after post-2020 apportionment. The table above indicates that {{ postgres.districtname }}'s population is = -0.001 && postgres.deviation <= 0.001\"> equal or close to the \"ideal\" (i.e., average) district population. It may not have to expand or shrink during redistricting. Other factors, however, may require its boundaries to change. 0.001\"> above the \"ideal\" (i.e., average) district population, meaning that the district may need to shrink by approximately {{ Math.abs(postgres.popdifffromavg).toLocaleString() }} people during redistricting. below the \"ideal\" (i.e., average) district population, meaning that the district may need to expand by approximately {{ Math.abs(postgres.popdifffromavg).toLocaleString() }} people during redistricting.
\r\n \r\n\r\n \r\n 0.001\">\r\n Between 2010 and 2020,\r\n {{ postgres.districtname }}'s population grew by\r\n {{ ((postgres.popchgpct1020) * 100).toFixed(1) }}% (an\r\n increase of\r\n {{ Math.round(postgres.popchg1020).toLocaleString() }} people from\r\n {{ Math.round(postgres.pop2010).toLocaleString() }}).\r\n \r\n \r\n \r\n Between 2010 and 2020,\r\n {{ postgres.districtname }}'s population fell by\r\n {{ Math.abs((postgres.popchgpct1020) * 100).toFixed(1) }}% (a decrease of\r\n {{ Math.abs(Math.round(postgres.popchg1020)).toLocaleString() }}\r\n people from {{ Math.round(postgres.pop2010).toLocaleString() }}).\r\n \r\n \r\n = -0.001 && postgres.popchgpct1020 < 0\">\r\n Between 2010 and 2020, {{ postgres.districtname }}'s population effectively did not change (only decreasing less than 0.1%, or {{ Math.abs(Math.round(postgres.popchg1020)).toLocaleString() }} from {{ Math.round(postgres.pop2010).toLocaleString() }} people).\r\n \r\n 0 && postgres.popchgpct1020 < 0.001\">\r\n Between 2010 and 2020, {{ postgres.districtname }}'s population effectively did not change (only increasing less than 0.1%, or {{ Math.abs(Math.round(postgres.popchg1020)).toLocaleString() }} from {{ Math.round(postgres.pop2010).toLocaleString() }} people).\r\n \r\n \r\n Between 2010 and 2020, {{ postgres.districtname }}'s population neither increased nor decreased.\r\n \r\n
\r\n\r\n \r\n Population change is calculated by comparing the district's 2020 population with 2010 population\r\n counts allocated from census blocks to current district\r\n boundaries.\r\n
\r\n\r\n Equal population districts is\r\n
\r\n Other factors need to be considered, such as ensuring that redrawn\r\n districts\r\n
\r\n Note: \"Amer. Indian/AK Native\" = American Indian/Alaska Native;
\"Nat.\r\n Haw./Other PI\" = Native Hawaiian/Other Pacific Islander\r\n
\r\n Percentages may not total 100% due to rounding.\r\n
\r\n \r\n {{ postgres.statename }} will continue to have {{ postgres.seats2020 }} seat in Congress\r\n \r\n 1\">{{ postgres.statename }} will continue to have {{ postgres.seats2020 }} seats in Congress\r\n \r\n {{ postgres.statename }} will gain {{ postgres.seats2020 - postgres.currentseats }} seat in Congress\r\n \r\n 1\">{{ postgres.statename }} will gain {{ postgres.seats2020 - postgres.currentseats }} seats in Congress\r\n \r\n {{ postgres.statename }} will lose {{ Math.abs(postgres.seats2020 - postgres.currentseats) }} seat in Congress\r\n \r\n {{ postgres.statename }} will lose {{ Math.abs(postgres.seats2020 - postgres.currentseats) }} seats in Congress\r\n
\r\n\r\n \r\n \r\n\r\n \r\n1\" class=\"text-caption\">NOTE: \r\n \r\n Current district population = 2020 Census. Average district population = {{ postgres.statename }}'s 2020 population ({{ postgres.statepop2020.toLocaleString() }} people) divided by {{ postgres.seats2020 }} seats.\r\n
\r\n\r\n\r\n Congressional seats in {{ postgres.statename }} since 1960\r\n (
Visit Redistricting & You: NYS to see how this district compares with proposed redistricting plans.
\r\nHawaii's state constitution requires that equal population for state legislative districts be determined differently than in other states.\r\n
\r\nIn particular, Hawaii's reapportionment commission is required to allocate the total number of members of each house of the state legislature among the four basic island units (Hawaii, Maui, Kauai and Oahu) using the total number of permanent residents of each basic island unit. Then, the commission apportions the number of legislators allocated to each basic island unit among the districts so that for each house the average number of permanent residents per member in each district is as nearly equal to the average for the basic island unit as practicable. \r\n
\r\nTherefore, the question of how much each district's population is above or below the average district size will not be known until the commission makes these determinations.\r\n
\r\nWhen {{ postgres.statename }} mapped its current state legislative districts after the 2010 Census, the population of each state house district was equal.
\r\n\r\n 0\">\r\n\r\n \r\n Based on the district's 2020 population compared with {{ postgres.statename }}'s 2020 population,\r\n {{ postgres.districtname }}'s population is\r\n above the state average. In order to draw equal population\r\n districts, the district would need to\r\n
\r\n Based on the district's 2020 population compared with {{ postgres.statename }}'s 2020 population,\r\n {{ postgres.districtname }}'s population is\r\n below the state average. In order to draw equal population\r\n districts, the district would need to\r\n
\r\n Based on current population estimates, this district's population is close enough to the statewide\r\n average that it may not need to expand or shrink.\r\n
\r\n \r\nWhen {{ postgres.statename }} mapped its state legislative districts after the 2010 Census, each one was within an overall range of {{ postgres.statedeviationpost2010 }}% (i.e., as much as {{ (postgres.statedeviationpost2010 / 2).toFixed(1) }}% smaller or larger than the average district population). The calculations below reflect the current 2019 districts.
\r\n\r\nWhen {{ postgres.statename }} mapped its current state legislative districts after the 2010 Census, each one was within an overall range of {{ postgres.statedeviationpost2010 }}% (i.e., as much as {{ (postgres.statedeviationpost2010 / 2).toFixed(1) }}% smaller or larger than the average district population).
\r\n\r\n \r\n 0\">\r\n\r\n When {{ postgres.statename }} mapped new districts after the 2010\r\n Census, they were equal in size.\r\n
\r\n\r\n Based on current population estimates, District\r\n {{ postgres.distlabel }}'s population is close enough to the statewide\r\n average that it may not need to expand or shrink.\r\n
\r\n \r\n\r\n \r\n 0.001\">\r\n Between 2010 and 2020,\r\n {{ postgres.districtname }}'s population grew by\r\n {{ ((postgres.popchgpct1020) * 100).toFixed(1) }}% (an\r\n increase of\r\n {{ Math.round(postgres.popchg1020).toLocaleString() }} people from\r\n {{ Math.round(postgres.pop2010).toLocaleString() }}).\r\n \r\n \r\n \r\n Between 2010 and 2020,\r\n {{ postgres.districtname }}'s population fell by\r\n {{ Math.abs((postgres.popchgpct1020) * 100).toFixed(1) }}% (a decrease of\r\n {{ Math.abs(Math.round(postgres.popchg1020)).toLocaleString() }}\r\n people from {{ Math.round(postgres.pop2010).toLocaleString() }}).\r\n \r\n \r\n = -0.001 && postgres.popchgpct1020 < 0\">\r\n Between 2010 and 2020, {{ postgres.districtname }}'s population effectively did not change (only decreasing less than 0.1%, or {{ Math.abs(Math.round(postgres.popchg1020)).toLocaleString() }} from {{ Math.round(postgres.pop2010).toLocaleString() }} people).\r\n \r\n 0 && postgres.popchgpct1020 < 0.001\">\r\n Between 2010 and 2020, {{ postgres.districtname }}'s population effectively did not change (only increasing less than 0.1%, or {{ Math.abs(Math.round(postgres.popchg1020)).toLocaleString() }} from {{ Math.round(postgres.pop2010).toLocaleString() }} people).\r\n \r\n \r\n Between 2010 and 2020, {{ postgres.districtname }}'s population neither increased nor decreased.\r\n \r\n
\r\n\r\n Population change is calculated by comparing the district's 2020 population with 2010 population counts allocated from census blocks to current district boundaries.\r\n
\r\n\r\n State legislative districts are required to have\r\n
\r\n Other factors need to be considered, such as ensuring that redrawn\r\n districts\r\n
\r\n Note: \"Amer. Indian/AK Native\" = American Indian/Alaska Native;
\"Nat.\r\n Haw./Other PI\" = Native Hawaiian/Other Pacific Islander\r\n
\r\n Percentages may not total 100% due to rounding.\r\n
NOTE: \r\n \r\n Average district population = {{ postgres.statename }}'s 2020 population ({{ postgres.statepop2020.toLocaleString() }} people) divided by # of state legislative lower house seats.\r\n
\r\n\r\nHawaii's state constitution requires that equal population for state legislative districts be determined differently than in other states.\r\n
\r\nIn particular, Hawaii's reapportionment commission is required to allocate the total number of members of each house of the state legislature among the four basic island units (Hawaii, Maui, Kauai and Oahu) using the total number of permanent residents of each basic island unit. Then, the commission apportions the number of legislators allocated to each basic island unit among the districts so that for each house the average number of permanent residents per member in each district is as nearly equal to the average for the basic island unit as practicable. \r\n
\r\nTherefore, the question of how much each district's population is above or below the average district size will not be known until the commission makes these determinations.\r\n
\r\nWhen {{ postgres.statename }} mapped its current state legislative districts after the 2010 Census, the population of each state senate district was equal.
\r\n\r\n 0\">\r\n\r\n Based on the district's 2020 population compared with {{ postgres.statename }}'s 2020 population,\r\n {{ postgres.districtname }}'s population is\r\n above the state average. In order to draw equal population\r\n districts, the district would need to\r\n
\r\n Based on the district's 2020 population compared with {{ postgres.statename }}'s 2020 population,\r\n {{ postgres.districtname }}'s population is\r\n below the state average. In order to draw equal population\r\n districts, the district would need to\r\n
\r\n Based on current population estimates, this district's population is close enough to the statewide\r\n average that it may not need to expand or shrink.\r\n
\r\n \r\nWhen {{ postgres.statename }} mapped its state legislative districts after the 2010 Census, each one was within an overall range of {{ postgres.statedeviationpost2010 }}% (i.e., as much as {{ (postgres.statedeviationpost2010 / 2).toFixed(1) }}% smaller or larger than the average district population). The calculations below reflect the current 2019 districts.
\r\n\r\nWhen {{ postgres.statename }} mapped its current state legislative districts after the 2010 Census, each one was within an overall range of {{ postgres.statedeviationpost2010 }}% (i.e., as much as {{ (postgres.statedeviationpost2010 / 2).toFixed(1) }}% smaller or larger than the average district population).
\r\n \r\n 0\">\r\n\r\n When {{ postgres.statename }} mapped new districts after the 2010\r\n Census, they were equal in size.\r\n
\r\n\r\n Based on current population estimates, {{ postgres.districtname }}'s population is close enough to the statewide average that it may not need to expand or shrink.\r\n
\r\n \r\n\r\n \r\n 0.001\">\r\n Between 2010 and 2020,\r\n {{ postgres.districtname }}'s population grew by\r\n {{ ((postgres.popchgpct1020) * 100).toFixed(1) }}% (an\r\n increase of\r\n {{ Math.round(postgres.popchg1020).toLocaleString() }} people from\r\n {{ Math.round(postgres.pop2010).toLocaleString() }}).\r\n \r\n \r\n \r\n Between 2010 and 2020,\r\n {{ postgres.districtname }}'s population fell by\r\n {{ Math.abs((postgres.popchgpct1020) * 100).toFixed(1) }}% (a decrease of\r\n {{ Math.abs(Math.round(postgres.popchg1020)).toLocaleString() }}\r\n people from {{ Math.round(postgres.pop2010).toLocaleString() }}).\r\n \r\n \r\n = -0.001 && postgres.popchgpct1020 < 0\">\r\n Between 2010 and 2020, {{ postgres.districtname }}'s population effectively did not change (only decreasing less than 0.1%, or {{ Math.abs(Math.round(postgres.popchg1020)).toLocaleString() }} from {{ Math.round(postgres.pop2010).toLocaleString() }} people).\r\n \r\n 0 && postgres.popchgpct1020 < 0.001\">\r\n Between 2010 and 2020, {{ postgres.districtname }}'s population effectively did not change (only increasing less than 0.1%, or {{ Math.abs(Math.round(postgres.popchg1020)).toLocaleString() }} from {{ Math.round(postgres.pop2010).toLocaleString() }} people).\r\n \r\n \r\n Between 2010 and 2020, {{ postgres.districtname }}'s population neither increased nor decreased.\r\n \r\n
\r\n\r\n Population change is calculated by comparing the district's 2020 population with 2010 population\r\n counts allocated from census blocks to current district\r\n boundaries.\r\n
\r\n\r\n\r\n State legislative districts are required to have\r\n
\r\n Other factors need to be considered, such as ensuring that redrawn\r\n districts\r\n
\r\n Note: \"Amer. Indian/AK Native\" = American Indian/Alaska Native;
\"Nat.\r\n Haw./Other PI\" = Native Hawaiian/Other Pacific Islander\r\n
\r\n Percentages may not total 100% due to rounding.\r\n
NOTE: \r\n \r\n Average district population = {{ postgres.statename }}'s 2020 population ({{ postgres.statepop2020.toLocaleString() }} people) divided by # of state legislative upper house seats.\r\n
\r\n\r\n\r\n \r\n {{ district }}
in {{ state }}\r\n \r\n \r\n \r\n \r\n \r\n Gathering data...\r\n